|Iron (Fe EDTA)
|Manganese (Mn EDTA)
|Copper (Cu EDTA)
|Zinc (Zn EDTA)
|Cobalt (Co EDTA)
3X Solution is a high quality foliar treatment for maximising yield potential in a wide range of crops.
A regular programme using 3X Solution can help improve crop quality and yield and can prevent the crop from being susceptible to nutrient deficiency.
Applications of 3X Solution will also help crops to overcome periods of stress and will assist retarded crops to reach their potential.
3X Solution is readily assimilated by the crop ensuring a good response to the treatment.
Foliar uptake will be enhanced by the addition of NA13¹ unless applied in tank mix with a pesticide.
Apply 3-10 l/ha, in a minimum of 200 l/ha water.
The spray tank should be filled with half the required water. If applicable, add the required amount of NA13 to the water before the 3X Solution. After shaking the container, measure the required amount of 3X Solution and add to the tank whilst maintaining constant agitation. Add the remaining water to correct dilution and spray.
¹ NA13 is an adjuvant designed to help with improved adhesion, deposition and penetration of the spray solution on the leaf surface. NA13 should be added at 0.1% of the spray volume, e.g. 100 ml in 100 litres of water. Maintain agitation and apply immediately after mixing.
² SW7 may be used as an alternative adjuvant on potatoes and vegetables. Use SW7 if it will be difficult to achieve good coverage, the leaves are waxy or tightly layered, or with dense crop canopies.